Pride Mobility Products LC-105 Manuel Du Propriétaire page 14

V . O P E R A T I O N
Follow these steps to properly sit in your lift chair:
1. Make sure that the lift chair is in the standing position.
2. Back into the lift chair and sit in the center of the seat.
3. Activate the DOWN button (switch) to lower the lift chair to a comfortable seated position.
Follow these basic steps to operate your lift chair from the seated position:
1. Activate the UP button (switch) to raise your lift chair to the standing position.
2. Activate the DOWN button (switch) to lower the lift chair to a comfortable seated position.
Follow these steps to recline your lift chair from the seated position:
1. Activate and hold the DOWN button (switch) until comfortably reclined.
2. Activate and hold the UP button (switch) to return to an upright, seated position. Release the button
(switch) when the lift chair reaches a comfortable seated position.
Follow these steps to properly stand up from your lift chair:
1. Activate and hold the UP button (switch) to raise your lift chair.
2. Release the button (switch) when the lift chair reaches a height where you can stand up comfortably.
Trendelenburg Position (LL770)
Elevate the footrest, and then recline the seatback until your feet are elevated higher from the ground than
your head. Please refer to the Hand Control Quick Reference Guide for more detailed information on your
specific hand control.
"Zero Gravity" Position (LL770)
Elevate the footrest, and then recline the seatback until your thighs and lower legs are positioned slightly
higher than your torso (body in V-like position). Please refer to the Hand Control Quick Reference Guide
for more detailed information on your specific hand control.
14 Lift Chair Series