Publicité
5.3
Mechanical Assembly
1. Mount the wires and the ceramic capacitors type 104 on the motors and fix the antennae on the small PCB.
The colour code used for the wires is: 1=green, 2=yellow, 3=orange, 4=blue (fig. 6 and 7).
wires/capacitors
2. Attach the battery holder and the small PCB onto the main PCB
(fig. 8). Connect the battery holder to the battery connector
(BAT, see PCB assembly).
3. Fix the PCB to the gearbox and put the wires through the holes
at the right side of the device (fig. 9).
V. 02 – 09/02/2018
KSR6
6
antennae
©Velleman nv
Publicité
