Tiiwee PIR sensor 02 Manuel D'utilisation page 6

1. The Indicator light can be switched off to save battery power ("LED
OFF position). Off course, in this mode an alarm signal will still be
sent to the Alarm Unit or the PIR Motion Sensor Alarm. However,
please note that the low battery indication is switched off in this
setting.
2. A waiting time of 5 minutes between detections can be set saving
battery power ("5 Min" vs "5s" switch). The 5-minute waiting
period can be used when your PIR sensor is meant to result in a
strong Siren alarm. This mode however is not advised when you
selected a Chime sound setting on your Alarm unit.
Mode Setting
The factory settings are "5s" and "Led On". This means that the sensor will
respect a 5-seconds waiting time between 2 signals and that the LED
Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.