Tiiwee PIR sensor 02 Manuel D'utilisation page 2

USA - ENGLISH
tiiwee PIR sensor 02
(For indoor use only)
For Tiiwee Home Alarm System
Introduction
Congratulations with your Tiiwee passive infrared detector (PIR). It is compatible
with the components of the Tiiwee Home Alarm System and can be wirelessly
connected to all Tiiwee 433 MHz Alarm Units (available separately).
This sensor applies digital dual-core fuzzy logic control processing technology and
intelligent analysis algorithms to prevent false alarms. It also features various
settings to adjust the PIR sensor to your personal situation.
Important: This sensor has been programmed to respect a 5 second delay
between 2 signals. This is intentional and will save battery power.
contents
1 x tiiwee PIR sensor 02
3 x batteries, 1.5V AAA-type, alkaline
1 x ball-joint mount
2 x screws
1 x instructions for use
Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.