Publicité
Descaling Your Humidifier (cont.)
6.
Remove the float from the base
chamber by pulling up the larger side
of the float [
Figure 3.11
the shaft out from the float brackets.
One side of the float brackets is
open (U-shaped) to allow removal.
Figure 3.12
[
]
Figure 3.11
Figure 3.12
] and pulling
7.
Place the float, water filter, and noise
silencer in a small container. Fill with
enough vinegar to cover them. Soak for
15–20 minutes.
Use the cleaning brush and a soft cloth
8.
to remove scale from all parts.
9.
Rinse all parts until any vinegar smell is
completely gone.
10.
Completely dry all parts with a cloth
before reassembling.
EN
13
Publicité
