Maintenance and cleaning
5.3 Draining the condensate tank
Dampness of the laundry is removed and condensed
during drying process and the water that arise
accumulates in the condensate tank. Drain the
condensate tank after each drying cycle.
A
Condensed water is not drinkable!
A
Never remove the condensate tank when
the program is running!
If you forget to drain the condensate tank, the machine
will stop during the subsequent drying cycles when
the condensate tank is full and the Condensate Tank
warning symbol will flash. If this is the case, drain the
condensate tank and press Start / Pause button to
resume the drying cycle.
To drain the condensate tank:
Pull the drawer and remove the condensate tank
carefully.
Dryer / User Manual
•
Drain the water in the tank.
•
If there is lint accumulation in the funnel of the
condensate tank, clean it under running water.
•
Place the condensate tank into its seat.
C
If the direct water draining is used as
an option, there is no need to empty the
condensate tank.
5.4 Cleaning the filter drawer
Lint and fiber that could not be captured by the lint
filter are blocked in the filter drawer behind the kick
plate. Filter Drawer Cleaning warning light will light up
maximum at every 5 drying cycles as a reminder.
There is a two-level filter in the filter drawer. Te first level
is the filter drawer sponge and the second level is the
filter cloth.
To clean the filter drawer:
•
Press the kick plate button to open the kick plate.
•
Remove the filter drawer cover by turning it in the
direction of arrow.
105 / 112 EN