DeLonghi PALACE 1800/1 Mode D'emploi Et D'installation page 25

In this mode, ever day of the week can be programmed.
1) Select the day with the PLUS and MINUS keys (d1 = Monday, d2 = Tuesday, etc.).
Press the MODE key to confirm. All of the time slots for the day are now proposed.
2) The bottom of the screen shows the time interval to be set. Press PLUS to use the
comfort temperature and MINUS to use the night temperature. At each selection the
time interval will progressively change.
3) Press the MODE key once to confirm, this will* take you back to the choice of the
individual daily program, and select the other days d2, d3.....d7.
4) Press the MODE key for 5 seconds until the word "END" appears.
EXAMPLE:
You want to set the time for Friday (d5) and set it from 7 to 9 in the morning and from
17 to 21 at night in comfort mode. The rest of the day will be in night reduction.
After choosing the day of the week to be programmed (Friday = d5
key 5 times), press the MODE key to confirm.
The screen starts showing all of the time slots.
There will be a flashing time slot of one hour. It starts from midnight, which means a
time interval from midnight to one o'clock.
In this case, if you want to switch to night reduction until 7 in the morning, press the
MINUS key 7 times.
If you set the night reduction, for example, at 18 degrees, it will be 18 degrees from
midnight to 7 in the morning.
Now you can set the comfort mode in the time slot from 7 to 9 in the morning, by
pressing the PLUS key twice, until 9.00. The time slots in comfort mode can be seen by
the presence of a lateral time slot.
From 9 to 17.00, press the MINUS key. From 17 to 21, press the PLUS key.
From 21 to midnight, press the MINUS key until the daily setting is finished.
Notches will only be seen at the time slots in comfort mode.
From h 00 to 12.00
From h 13 to 00
To confirm all of the weekly programming, press the MODE key for at
least 5 seconds until the word "END" appears.
Here the link for the programming instructions:
https://youtu.be/s__KXGUm_9w
[Fig. 18b; 18c]
press the PLUS
24