Publicité
Les langues disponibles
Les langues disponibles
BEFORE THE FIRST USE
•
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
•
Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
•
Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz)
•
Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
SPECIAL SAFETY INSTRUCTIONS FOR THIS
MACHINE
•
Only operate this machine under supervision.
•
Do not interfere with any safety switches.
•
Do not insert anything into the rotating hooks while the machine is
working.
•
Place the machine on a smooth, flat and stable working surface.
•
Do not insert the mains plug of the machine into the power socket
without having installed all the necessary accessories.
USE
•
In order to lift the arm, push the lift button. The arm will now move upwards.
•
Remove the mixing bowl by turning it anticlockwise.
•
Mount the required utensil by inserting the top into the output shaft
and lock it by turning the utensil anticlockwise.
•
Now fill the mixing bowl with your ingredients.
•
Install the mixing bowl by turning it clockwise until it is locked.
•
Lower the arm by using the lift arm and press the arm down.
•
Insert the mains plug into a properly installed safety power socket.
•
Switch on the machine by using a speedlevel between 1 and 5
(corresponding to the mixture and accessory which is used).
•
For pulse operation (kneading at short intervals), use the "PULSE"
button.
•
After kneading/stirring/whisking use the "OFF" button to turn off the
appliance. Then remove the mains plug.
•
Press the lift button downwards and the arm will be raised.
•
The mixing bowl can now be removed by turning the bowl
anticlockwise.
•
Remove the mixture out of the bowl with the help of a spatula.
•
Clean the parts as described under "Cleaning" .
The appliance will automatic switch to the OFF mode according to the
table below
Speed Setting
Default Timer
1
90 sec.
2
6 min. 30 sec.
3
9 min.
4
9 min.
5
9 min.
How to remove and install the dough hook, whisk or beater
•
Install: make sure the utensil fits properly in the notches of the shaft,
push and turn it anti clockwise
•
Remove: push and turn it clockwise.
Multi mixer with bowl
EN
5
Publicité
