en - Installation notes
4
Explanation of the safety notes and warnings on the ma-
chine
Read the operating instructions
Read all the instructions, e.g., the installation instruc-
tions
Warning, hot surfaces
Warning, voltage up to 1000 volts
Grounding
Equipotential bonding
Installation requirements
The washing machine must be installed by Miele Service or by
properly trained staff of an authorized dealer.
This washing machine must be installed in accordance with all rel-
evant regulations and standards. Local energy supplier regulations
must also be observed.
This washing machine must only be operated in a room that has
sufficient ventilation and which is frost-free.
The washing machine should not be installed or operated in any
area where there is a risk of explosion.
General operating conditions
This washing machine is intended only for use in a commercial envi-
ronment and must only be operated indoors.
- Ambient temperature: 32-105°F (0-40°C)
- Relative humidity: non-condensing
- Maximum height above sea level of location site: 6500 ft (2000 m)
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Tip: Have the installation site inspected and seek the advice of a spe-
cialist in instances where increased noise may cause a nuisance.
Installation
This washing machine must be transported to its installation site us-
ing a suitable pallet truck. Remove the transport packaging.