Bosch GWS 12-125 CIPX Professional Notice Originale page 21

a power failure or when the mains plug is pulled. This
prevents uncontrolled restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for roughing metal, stone and
ceramic materials.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone. Together with the hand guard (accessory), the power
tool can be used for sanding with elastic sanding pads.
The power tool is suitable only for working without water.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool is not suitable for drilling tiles.
The power tool must not be used to grind concrete.
Technical Data
Angle grinder
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding spindle
Speed preselection
Constant electronic control
Bosch Power Tools
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) On/off switch
(4) Speed preselection thumbwheel
(GWS 13-125 CIEX/GWS 12-125 CIEPX/
GWS 17-125 CIEX/GWS 15-125 CIEPX)
(5) Unlocking lever for on/off switch
(GWS 12-125 CIPX/GWS 12-125 CIEPX/
GWS 15-125 CIPX/GWS 15-125 CIEPX)
(6) Auxiliary handle (insulated gripping surface)
(7) Extraction guard for grinding
(8) Protective guard for grinding
(9) Protective guard for cutting
(10) Mounting flange with O‑ring
(11) Carbide grinding head
(12) Grinding disc
(13) Cutting disc
(14) Two-pin spanner for clamping nut
(15) Clamping nut
(16) Quick-clamping nut
(17) Handle (insulated gripping surface)
(18) Grinding spindle
(19) Extraction guard for cutting with cutting guides
(20) Diamond cutting disc
(21) Hand guard
(22) Rubber sanding pad
(23) Abrasive disc
(24) Round nut
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 13-125 GWS 12-125
CIX
3 601 G9E 1.. 3 601 G93 3..
W 1300
W 650
-1
min 11,500
-1
min –
mm 125
M 14x1.5 M 14x1.5
mm 22
–
●
English | 21
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
GWS 13-125 GWS 12-125
CIPX CIEX
3 601 G9F 1.. 3 601 G94 3..
1200 1300
550 650
11,500 –
– 2800–11,500 2800–11,500
125 125
M 14x1.5
22 22
– ●
● ●
1 609 92A 7W6 | (31.05.2022)
a)
CIEPX
1200
550
–
125
M 14x1.5
22
●
●