Publicité
Les langues disponibles
Les langues disponibles
x16
8
18
x16
9
19
x2
16
20
x4
17
21
FIG. 4
16
9
8
19
FIG. 4
18
17
17
16
18
17
1
x2
25
x11
26
x11
x22
9
8
ORDER OF PLAYERS
(Overhead View)
FIG. 4 A
16
17
FIG.4
x4
9. Slide the Player Rods (#16-18) through the bushings of one
side of the Side Aprons (#1) in the order shown in FIG.4.
x8
Note: The Player Rods have a hole at their end where the
Handles (#10) will go.
10. Place a Foam Bumper (#9), a Rod Washer (#8), either 2,3
or 5 Players (#19 or #20) and then place another Rod
Washer (#8) and another Foam Bumper (#9) onto the other
side of the Player Rod. See FIG.4A.
11. Assemble the 1-Player Rod, please place the parts in the
order as shown in FIG.4B.
17
Note: Players of the same team color should have Handles
(#10) on the same side, and each team's players
16
should be facing their opponent.
17
18
12. Now insert the Player Rods through the bushings on the
other side of the Aprons (#1) (at the other side of the table).
18
17
13. Screw the Players to the rod using Screws (#21). The
16
screws need to be secured into each player rod. See
17
FIG.4B.
14. Screw the Stop Rings (#25) to the rod using two Screws
= BLACK
(#26) per Stop Ring.See FIG.4B
Note: The goalie should be at the left of each player
FIG. 4 B
5
https://manual-hub.com/
Publicité
