Bosch 0 603 9B0 300 Notice Originale page 15

(2) Torque presetting ring
(3) Operating mode presetting ring
(4) Gear selector switch
(5) On/off switch
(6) Rotational direction switch
(7) Battery release button
(8) Battery charge indicator
a)
(9) Battery
(10) "PowerLight"
(11) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless drill/driver
Article number
Rated voltage
A)
No-load speed
– First gear
– Second gear
A)
Impact rate
Max. torque, hard/soft screw-
driving application according to
A)
ISO 5393
Max. drilling diameter
– Steel
– Wood
– Masonry
Max. screw diameter
Chuck capacity
Drill spindle thread
Weight according to EPTA-Pro-
B)
cedure 01:2014
Recommended ambient temper-
ature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended rechargeable bat-
teries
D)
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery PBA 18V
2.5Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
D) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Bosch Power Tools
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 87 dB(A); sound power level
98 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-1:
Drilling into metal: a
Impact drilling: a
Screwdriving: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
PSB 18 LI-2
The stated vibration level and noise emission value repres-
Ergonomic
ent the main applications of the power tool. However, if the
3 603 JB0 3..
power tool is used for other applications, with different ap-
V= 18
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
-1
min 0–430
working period.
-1
min 0–1 400
To estimate vibration and noise emissions accurately, the
-1
min 0–22,500
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
Nm 32/28
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
mm 13
power tool and application tools, keeping their hands warm,
mm 38 and organising workflows correctly.
mm 11
Assembly
mm 10
mm 1.5–13
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
1/2"
changing tool, etc.). The battery should also be re-
kg 1.6
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
°C 0 to +35
Charging the Battery
°C –20 to +50
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
PBA 18V...W-.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
AL 18...
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
English | 15
(triax vector sum) and uncertainty K
h
2 2
<2.5 m/s , K = 1.5 m/s ,
h
2 2
= 27.0 m/s , K = 1.5 m/s .
h
2 2
<2.5 m/s , K = 1.5 m/s .
h
1 609 92A 84J | (12.07.2022)