Télécharger Imprimer la page

Chicago Pneumatic CP 0016 Prescriptions De Sécurité Et Instructions Pour L'opérateur page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Safety and operating instructions
Overview
To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.
Design and function
These instructions apply to the CP 0016, CP 4130
and CP 4131 models.
The CP0016, CP 4130 and CP 4131 are pneumatic
tools designed for medium duty to heavy duty
chipping, cutting and trimming as well as light
concrete demolition and soft tunnelling. The
machine can be used both horizontally and
vertically. No other use is permitted.
To choose the correct insertion tool, see the spare
parts list.
Choosing the correct
pneumatic hammer for a
task
It is important to choose the correct size of
pneumatic hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece of
broken material should be removed from the
workpiece within 5–10 seconds operation.
>
If it takes less than 5 seconds a smaller pneumatic
hammer should be selected.
>
If it takes more than 10 seconds a larger
pneumatic hammer should be selected.
12
CP 0016, CP 4130, CP 4131
Main parts
CP 0016
CP 4130
9800 0616 90a | Original instructions

Publicité

loading

Ce manuel est également adapté pour:

Cp 4130Cp 4131