Axis Communications M3011 Guide D'installation page 6

Page 6
Assign the IP address
The AXIS M3011 Network Camera is designed for use on an Ethernet network and requires an IP
address for access. Most networks today have a DHCP server that automatically assigns IP addresses
to connected devices. If your network does not have a DHCP server, the AXIS M3011 Network
Camera will use 192.168.0.90 as the default IP address.
AXIS IP Utility and AXIS Camera Management are recommended methods for setting an IP address
in Windows. These free applications are available on the Axis Network Video Product CD supplied
with this product, or they can be downloaded from www.axis.com/techsup Depending on the
number of cameras you wish to install, use the method that suits you best.
Method
AXIS IP Utility
See page 7
AXIS Camera Management
See page 8
Note:
If you are unable to set the IP address, check for any firewall blocking the operation.
See page 11 for other available methods for setting or discovering the IP address of the
AXIS M3011 Network Camera, in relation to other operating systems.
Recommended for
Single camera
Small installations
Multiple cameras
Large installations
Installation on a different subnet
AXIS M3011 Installation Guide
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista