Publicité
Les langues disponibles
Les langues disponibles
EN
SAFETY INSTRUCTIONS
Warning: Read the manual carefully before use. Failure to follow the warnings and instructions may result in tool damage,
physical injury and/or damage to property. Store the manual in a safe place for future reference.
SYMBOLS
WARNING
Indicates an imminent danger. Failure to follow this
instruction may result in severe bodily injury or even death.
ATTENTION
Determination of the possibility of a dangerous situation.
Failure to follow this instruction may result in bodily injury
or property damage.
NOTE
Indicates tips for use and important information.
BASIC SAFETY RULES
Workplace
• The workplace must be clean and well lit.
• The workplace must be free of flammable liquids, and the air must be free of dust and gases. During operation, the tool may spark, which can lead to an
explosion or fire.
• There must be no children or bystanders in the working area.
Electrical Safety
• The appliance's plug must match the power socket. Do not make any changes to the plug.
• Avoid contact with grounded surfaces, pipes, heating systems, electric stoves and refrigerators.
• Protect the product from rain and moisture. Water entering the product case may cause electric shock.
• Do not misuse the cable, do not use it to hang or carry the product. Keep the cable away from heat, oil, sharp edges, or moving tool parts. A damaged or
entangled cable can cause electric shock.
• When using the product outdoors, use only an extension cable approved for outdoor use.
Personal Safety
• Stay alert, watch what you are doing and do your work thoughtfully. Do not operate the product if you are sick or under the influence of alcohol or drugs.
This could lead to injury.
• Dress appropriately. Clothing should not be too loose. Remove your jewelry and tuck your hair under a headdress.
• Avoid accidentally turning on the product. Before inserting the plug into the socket, make sure that the switch of the product is in the "Off" position.
• Before turning on the product, make sure that the tools for adjusting and installing accessories (wrenches, etc.) are removed from the product.
• Make sure you are comfortable and stable while you work. Loss of balance can lead to injury.
• Wear personal protective equipment. Be sure to wear protective goggles. If necessary, wear a dust mask, non-slip shoes and a hardhat.
Operation of the product
• Use a vise or other clamp to hold the workpiece securely.
• Do not overload the product. Use only tools designed for certain types of work. Using a specialized tool will make your job easy and safe.
• Do not use the product with a defective switch. A product that cannot be turned on or off must be repaired immediately.
• Be sure to disconnect the product from the mains during operations to adjust it and change accessories. This will help prevent accidental activation of the
product.
• Keep the product out of the reach of children and inexperienced persons.
• Carefully take care of the product, the equipment used with it must be clean and in working order. Well-maintained equipment will make your work fast and
of high quality.
• Check the ease of movement, integrity and absence of damage on the moving and body parts of the product. In the event of a malfunction, stop using the
product and immediately return it for repair.
• Use accessories recommended for this type of product.
3
WWW.NIKOLAOUTOOLS.COM
Read the operating instructions before commissioning.
Wear eye protection.
Publicité
