Publicité
Les langues disponibles
Les langues disponibles
troubleshooting
PROBLEM
Motor does not start
Suction force is gradually
decreasing
Cord does not rewind
fully
Vacuum cleaner does not
pick up dirt
Low or decreasing
suction
Body overheating
Static electricity
discharge
SOLUTION
• Check the cable, plug, and socket.
• Let cool.
• Check for a blockage and remove.
• Pull the cord out 2-3m (6.5 - 9.75 ft.) and push the cord
rewind button.
• Check the hose and replace if necessary.
• Please check the fi lters and, if needed, clean as illustrated
in the instructions. If the fi lters are clogged and cannot be
cleaned, replace with new ones.
• Please check the fi lters. If needed, clean as illustrated in the
instructions.
• Please decrease power suction.
• This can also occur when the air in the room is very dry.
Please ventilate the room to increase the humidity.
troubleshooting _15
Publicité
