Costway GT4256 Mode D'emploi page 7

7
Horizontal tube assembly: Place the installed product on the
ground in parallel, and connect the part (J) to the U-shaped tube
with bolts (K). Note: Tighten the bolt (K) inward on the outside of
part J(refer to the image shown by the arrow).
12
K X2 J X1
8
Cover assembly: Open the cover, add it to the product and and
bind the two sides of inner upper and the lower four corners. The
door is equipped with zipper. When the door is open, the door can
be rolled and tied to the upper support. The assembled product
picture is as follows:
M
13