Costway GT4256 Mode D'emploi page 6

4
Long side panel assembly: Use the tool included in the package
(part G) and connect the parts (2 parts C) to the 2 long sides of part
A and part B with bolts (part F).
5
Support leg assembly: Place the side of the product frame (part C)
on the ground, and connect the parts (4 parts E) to the four corners
of the product frame with bolts (part F). Note: The parts E are inside
the curved circle of part A and part B (refer to the image shown by
the arrow).
10
C X2 F X4
E X4 F X24
6
U-shaped tube assembly: Place the installed product on the ground
in parallel, and connect the parts (2 parts I) to the inside of the
short side plate of the product with bolts (part F). Note: Tighten the
bolt (part F) inward on the outside of part D (refer to the image
shown by the arrow).
F X8 I X2
11