CLAS PE 2000T Mode D'emploi page 42

2 COLUMNS ASYMETRIC POST LIFT
PE 2000T
WITH BASEMENT 400V 4T
MAINTENANCE AND CARE
CAUTION:
All pins, sliding blocks, steel cables, and all moving parts of the lift must be lubricated
regularly.
Hydraulic oil should be replaced at least once a year. The oil level must always reach at
least the indicated minimum limit.
It is recommended to check the integrity of the steel cables regularly, if abrasions or
defects are found, it is not advisable to use the lift and please contact the manufacturer.
When replacing the hydraulic oil, place the lift in the ground position and proceed to
draining the oil. If the oil is refilled, it is recommended to use a filter.
42