Metabo TP 6000 S Instructions D'utilisation page 10

ENGLISH
10. Environmental Protection
The packaging of the pump can be
100 % recycled.
Worn out power tools and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
12. Technical Specifications
Mains voltage
Frequency
Rated output
Rated current
Fuse protection min. (time-lag or L-type circuit breaker)
Running capacitor
Rated speed
Pump capacity max.
Delivery head max.
Delivery pressure max.
Immersion depth max.
Standing water max.
Temperature of the primed medium max.
Degree of protection
Degree of protection
Insulation class
Materials
Pump casing
Pump shaft
Impeller
Power cable (HO 5 RN-F)
Discharge port (AG=male, IG=female)
Dimensions (pump casing)
Height
Width
Diameter
Weight
Max. length of extension cable
2
at 3 x 1.0 mm lead cross-section
2
at 3 x 1,5 mm lead cross-section
10
11. Available Accessories
For this equipment the following acces-
sories are available at specialist dealers.
3
Note:
Illustrations and stock numbers
can be found at the end of these instruc-
tions.
A Multi adaptor
Inlet port thread:
1" male
Discharge port thread:
1" male + 3/4" male + hose stem 1"
+ 3/4"
B Elbow
Inlet port thread:
1" female
Discharge port thread:
1" female + 1 1/4" male
C Discharge hose for submersible
pumps
1" x 7m
V 230
Hz 50
W 250
A 1.1
A 10
F 3
-1
min 2800
l/h 6000
m 6
bar 0.6
m 5
mm 30
°C 35
IP 68
I
F
Polypropylene
Stainless steel
Noryl
m 10
1" AG
mm 260
mm 200
mm 160
kg 3.2
m 60
m 100
1