Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Occasionally, a minor problem may arise, and a service call may not be necessary - use this troubleshooting guide for
a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby's Toll Free
Number for assistance.
PROBLEM
Unit does not start when press-
ing on/off button
Not cool enough
Noisy or vibration
Gurgling sound
DISPOSAL
Check for local regulatory compliance regarding the approved and safe disposal of this appliance.
Tel: 1-800-26-
POSSIBLE CAUSE
•
P1 appears in the display
window
•
Room temperature is lower
than the set temperature.
(Cooling mode)
•
The windows or doors in the
room are not closed
•
There are heat sources inside
the room
•
Exhaust air hose is not con-
nected or blocked
•
Temperature setting is too
high
•
Air fi lter is blocked by dust
•
The ground is not level or not
fl at enough
•
The sound comes from the
fl owing of the refrigerant
inside the air conditioner
15
(1-800-263-2629)
•
Drain the water in the bottom
tray
•
Reset the temperature
•
Make sure all the windows
and doors are closed
•
Remove the heat sources if
possible
•
Connect the hose and make
sure it can function properly
•
Decrease the set temperature
•
Clean the air fi lter
•
Place the unit on a fl at, level
ground if possible
•
It is normal
SOLUTION
Publicité
