Publicité
Les langues disponibles
Les langues disponibles
The Controls of
you Wine Cooler
1
2
1. Run
Indicator light illuminates to signify the
cooling mode is currently in operation.
2. Electronic Display
Dislpay screen shows current cabinet
temperature and set temperature. (see
'Setting the Temperature' below)
Setting the
Temperature
When you plug in your
wine cooler for the first
time, the temperature
will automatically be set
to 54°F (12°C) and will be
displayed in the
Fahrenheit scale (°F).
Operating Instructions
3. C° / F°
Adjacent indicator light denotes which
scale of temperature is displayed.
4. 'UP' Button
Used to raise (warm) the temperature
in 1° degree increments.
'DOWN' Button
Used to lower (cool) the
temperature in 1° degree increments.
• To switch the display
between the Fahrenheit (°F)
and Celsius (°C) scale,
depress the UP and DOWN
control buttons simultaneously for
approximately five (5) sec-
onds
• The temperature range can
be set as low as 39°F (4°C)
or as high as 64°F (18°C) to
suit your specific wine stor-
age requirements. Each
depression of the UP or
DOWN button will allow you
adjust the temperature in 1°
degree increments within the
aforementioned range.
6
3
4
• You may view your 'set'
temperature at any time by
briefly depressing either the
'UP' or 'DOWN' button. The
set temperature will flash in
the display area for 5 sec-
onds before the display
resumes showing the current
cabinet temperature.
Please note: In the event of
a power failure or interrup-
tion, all modified settings are
lost and the default settings
are used once power
resumes.
Publicité
