Notes
•
Store the drainage cover and the water plug properly.
•
During drainage, the body can be tilted slightly backwards.
•
If the water container cannot hold all of the water, before the water container is full, reinsert the
water plug as soon as possible to prevent water from flowing on to the floor or the carpet.
•
When the water is discharged, reinsert the water plug, and tighten the drainage cover.
VII. MAINTENANCE
Cleaning:
Before cleaning and maintenance, turn off the machine and unplug the plug.
1. Clean the surface
Clean surface of machine with a wet soft cloth. Do not use chemicals such as benzene, alcohol,
gasoline, etc., as these can damage the surface of the air conditioning and/or the whole
machine.
2. Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the air conditioning is reduced, be sure
to clean the filter screen once every two weeks.
3. Clean the upper filter screen frame
1) Unscrew one screw fixed by the EVA filter net and back shell with screwdriver, and take out the
EVA filter net.
2) Put the EVA filter screen into warm water with neutral detergent (about 40 ℃ / 104 ℉ ) and dry it
outside (but not in direct sun) after rinsing clean.
VIII. UNIT STORAGE
1. Unscrew the drainage cover, unplug the water plug, and discharge the water in the water pan into other
water containers or directly tilt the body to discharge the water into other containers.
2. Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the drainage
pipe becomes dry, so as to keep the inside of the body in a dry state and prevent it from mildewing.
3. Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping post; install
the water plug and the drainage cover.
4. Remove the exhaust pipe and store it properly.
5. Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep it out of the
reach of children, and take dust control measures.
20