Publicité
Les langues disponibles
Les langues disponibles
1.3 Install the pipe
1) Elongate the exhaust pipe (as shown in Fig.3 and Fig.4).
2) The pipe cannot be distorted nor has substantial turning (greater than 45 ° ).
3) Do not block the ventilation of the exhaust pipe
Important Notice:
The length of the exhaust hose should be 280~1,500mm, and this length is based on the specifications of
the air conditioning. Do not use extension tubes or replace it with a different hose, as this may cause a
malfunction. Exhaust hose must be not blocked; otherwise it may cause overheating.
VI. DRAINAGE INSTRUCTIONS
This machine has two drainage methods: manual drainage and continuous drainage.
1. Manual drainage:
1)
When the machine stops after the water is full, turn off the machine power and unplug the power
plug.
Notes: Please move the machine carefully, so as not to spill the water in the water pan at the bottom of the
body.
2)
Place the water container below the side water outlet behind the body.
3)
Unscrew the drainage cover and unplug the water plug, the water will automatically flow into the
water container.
Fig.3
Fig.4
19
Publicité
