Energizer EZCP7000 Instructions Originales page 17

2. Operating instructions of remote control
The remote control Panel is as follows:
Instructions of key operation of the high-quality remote control are as follows:
1. Power: Press the
2. Timer: Press the
3. Down: Press the
4. Mode: Press the
5. Up: Press the
6. Fan: Press the
7. Sleep Mode: Press the
IV. PROTECTION FUNCTION
1. Frost Protection Function:
In cooling, if the temperature of the EVA pipe sensor is too low, the machine will automatically enter
protection status; if the temperature of the EVA pipe sensor rises to a certain temperature, it can
automatically revert to normal operation.
2. Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will automatically sound an alarm,
and the W.F indicator will flash. At this point, you need to drain the water (details see Drainage
Instructions at the end of this chapter). After the water is emptied, the machine will go into standby.
key to turn on or turn off the machine.
key to set timing.
key to reduce temperature and timing set value.
key to switch between cooling, heating, fan, dehumidifying mode.
key to increase temperature and timing set value.
key to select high, low wind speed.
key to turn on the sleep mode.
17