Publicité
Les langues disponibles
Les langues disponibles
EN
Setting the timer to turn more than one cooking zone off
1.
When using the timer function in more than one cooking zone, then the timer
display will show the shortest time (e.g. zone 3# setting time of 3 minutes,
zone 2# setting time of 6 minutes, the timer indicator shows "3"). The flashing
red dot next to power level indicates of which cooking zone is the time shown
on the timer display.
2.
When
will
be
Hints and Tips
Problem
The induction hob cannot
be turned on.
The touch keys are
unresponsive.
The touch keys are
difficult to operate.
The glass is being
scratched.
Some cookware make
crackling or clicking
noises.
cooking
timer
expires,
automatically
switched
Possible causes
No power.
The keys are locked.
There may be a slight film
of water over the keys
or you may be using the
tip of your finger when
touching the keys.
Rough-edged cookware.
Unsuitable, abrasive
scourer or cleaning
products being used.
This may be caused by
the construction of your
cookware (layers of
different metals vibrating
differently).
the
corresponding
off
and
the
display
What to do
Make sure the induction
hob is connected to the
power supply and that it is
switched on.
Check whether there is
a power outage in your
home or area. If you've
checked everything and
the problem persists, call
a qualified technician.
Unlock the keys. See
section 'Using your
induction hob for
instructions.
Make sure the touch key
area is dry and use the
ball of your finger when
touching the keys.
Use cookware with flat
and smooth bases. See
'Choosing the right
cookware'.
This is normal for
cookware and does not
indicate a failure.
cooking
zone
will
show
Publicité
