EN
When the hob is in the lock mode, all the keys are disabled except the ON/OFF (2)
and Keylock (1). You can always turn the induction hob off with the ON/OFF (2) in an
emergency, but you shall unlock the hob first in the next operation.
Over-Temperature Protection
A temperature sensor is monitoring the temperature inside the induction hob. When an
excessive temperature is detected, the induction hob will stop operation automatically.
Detection of Small Articles
When undersized or non-magnetic cookware (e.g. aluminium), or some other small
items (e.g. knife, fork, key) has been left on the hob, the hob will automatically go
to standby mode in 1 minute. The fan will keep cooking down the induction hob for a
further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function. It shuts down the cooking zone
automatically if you ever forget to turn it off. The default maximum working time for
each power level is shown in the table below:
Power level
Default working timer
(hour)
When the cookware is removed, the display shows the power level during 5s and
then displays
for 1 minute. After that it will display "H", which means the surface of
cook zone is hot. Please do not touch it. When the surface has cooled down to a safe
temperature, it will display "-" for 1 minute, then the zone will automatically switch off.
Using the Timer
Timer function can be used in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
1~3
4~6
360
180
7~8
9
120
90