Publicité
Les langues disponibles
Les langues disponibles
(
SECTION 3 • OPERATION
)
&Wind Speed Data Window
This weather station features an advanced
wind speed data window that provides the
wind speed, the peak value and the average
value.
WIND SPEED: most current wind speed
reading, this value is updated every 18
seconds.
PEAK: the highest wind speed reading
recorded in the last hour.
AVERAGE: the combined averaged wind
speed readings from the last 2 minutes.
NOTE: The wireless sensor must be placed
outdoors to observe outdoor wind speed.
E>Seasonal Window (wind chill/dew point/heat index)
This weather station features a
"Seasonal"
window which will automatically
display the wind chill, the dew point or the heat index information when it is
relevant.
above 80°F (27°C)
Less than 40°F (4°C)
WIND CHILL
HEAT INDEX
&History Mode Graphing
This weather station features a selectable history mode which will graph and
display the changes for the last 12 hours [-12,-6,-3,-2,-1, O]. There are 3
selectable weather categories; Barometer [barometric pressure).
Temperature or Wind Speed. Press the
""HISTORY
MODE" button to alternate
through the 3 options. Note the graphing icon
..
M1.rn
..
next to the currently
selected data window.
BAROMETER: hourly reading on the hour.
TEMPERATURE: hourly [outdoor) temperature reading on the hour.
WIND SPEED: hourly wind speed AVERAGE reading.
-8-
(
SECTION 3 • OPERATION
)
oWireless Signal Reception Icons
T111I
The main unit has a signal reception icon in the outdoor wind speed/
temperature display area. If most or all four of the bars are present, wireless
reception is good and no action is required. If there are a low number of ··bars"
present, you may experience wind speed/temperature inaccuracy. In either
case, you may need to relocate the main unit or the wireless sensor.
The main unit has a signal reception icon near the atomic clock display. If the
atomic clock signal bars are low, the clock may be
inaccurate
or may not
automatically adjust for daylight saving time [DST). Refer to the
troubleshooting section in this manual
if
you are having reception issues.
eMoonphase
This weather station features a moonphase window which will automatically
display the current moon phase, provided the calendar is set properly.
,
)
NEW
WAXING
CRESCENT QUARTER
1ST
WAXING
FULL
GIBBOUS
WANING
GIBBOUS
3RD
QUARTER CRESCENT
(
WANING
Main Unit: MIN/MAX Memory
This wireless weather station features a MIN/MAX memory feature which records
the MINIMUM and MAXIMUM indoor & outdoor temperature and humidity
readings.
To
view the MINIMUM temperature and humidity readings, press and release the
"'MIN/MAX" button. Note the .. MIN .. icon on the display.
To
clear the MIN recorded values, press and hold the
.....
and
..
SCALE
..
buttons
simultaneously for 3 seconds while in the MIN view mode. Dashes will display in
the display to confirm you have cleared the MIN values for outdoor temperature
and indoor temperature/humidity.
To
view the MAXIMUM temperature and humidity readings, press and release the
"MIN/MAX"
button. Note the .. MAX" icon on the display.
To
clear the MAX recorded values, press and hold the ..... and .. SCALE .. buttons
simultaneously for 3 seconds while in the MAX view mode. Dashes will display in
the display to confirm you have cleared the MAX values for outdoor temperature
and indoor temperature/humidity.
- 9 -
Publicité
