Télécharger Imprimer la page

ACU-RITE 00634 Manuel D'instructions page 4

Publicité

Les langues disponibles

Les langues disponibles

--------------
Main Unit : Basic Setup
After installing batteries, it is recommended that you set the clock and calendar
initially. After the atomic clock signal is acquired, which may take up to 24 hours,
the clock accuracy and daylight saving time changes will be automatically
maintained.
To
set the clock and other preferences,
press AND HOLD the
"SET'
button for 5
seconds to enter into SET MODE. Once in set mode, the preference you are
currently setting will blink on the display.
To
adjust
the currently selected [flashing] preference item, press the"+" button
[press and HOLD to fast adjust].
To
save
your adjustments, press the
""SET'
button again to move on to adjusting
the next preference. The preference set order is as follows:
TIME ZONE (PST MST CST EST)
DST [Daylight Saving Time ON OR OFF)
CLOCK HOUR
CLOCK MINUTE
YEAR
CALENDAR MONTH
CALENDAR YEAR
You will automatically exit SET MODE if no buttons are depressed for 30 seconds.
You may enter basic setup mode again at any time by pressing AND HOLDING
the
"SET'
button.
Main Unit : Scale Selection
The main unit is capable of displaying some values in an alternate scale mode.
To switch between modes, press the "SCALE" button.
SCALE MODE 1
Temperature - °F [fahrenheit)
Barometric Pressure- inHg [inches of mercury)
Wind Speed/Peak/Average- mph [miles per hour)
SCALE MODE 2
Temperature - °C [Celsius)
Barometric Pressure- hPa [Hectopascal)
Wind Speed/Peak/Average- kph [kilometers per hour)
NOTE: The "WIND SPEED" history mode chart will not change to "kph" scale, it
will remain displaying
··mph"
data.
- 6 -
Setup is Now Complete
The wireless sensor will soon send a signal to the main unit and the two units
will be synchronized. It may take a few minutes for synchronization to be
complete. If both or one of the units appear to be functioning improperly, refer
to the troubleshooting section in this manual.
(
SECTION 3 • OPERATION
)
o
14 Day Learning Mode
This weather station has a patented
"fourteen day learning mode"
calibration process. During this
learning mode the weather station
will make altitude calculations that
may affect the accuracy of the
forecast. Once the 14 day learning
mode process is complete, the
learning mode icon will disappear and
the weather forecast should be ready
for superior operation.
14 day
Learning
Mode
0Future
Forecast Icon
The future forecast feature automatically gives you the predicted weather
forecast icon for the next 12 to 24 hours based on an advanced algorithm that
analyzes barometric pressure changes and temperature. This weather
forecaster will provide the most accurate forecast that a single station
instrument can provide.
rain or snow
rain or snow
O=
MOSTLY SUNNY
mostly sunny
conditions
are forecasted
next 12-24 hours
- 7 -

Publicité

loading