Süd wind ambientika Manuel De Configuration Et D'utilisation page 38

At this point the products continue to work following the pre-set function with no possibility of
changing it until the maintenance is carried out.
Once the maintenance has been carried out, the alarm can be reset by pressing the RESET
button which can be found next to the FILTER STATUS on the App.
It is recommended to change the filters when the use of them compromise the air transit or when
their effectiveness has failed or at most within 2 years. Please contact your reseller for a
replacement filter kit.
For details, please refer to the App configuration and usage manual, which can be consulted
directly from the App, in "Settings/Product Instruction Manual page".
MAINTENANCE HOW TO PERFORM
All the maintenance operations are intended for qualified personnel only.
Make sure that the network connection in the room is disconnected before performing
maintenance operations.
1 2
38