Süd wind ambientika Manuel De Configuration Et D'utilisation page 26

INTRODUCTION – INTENDED USE
The product is artistically made and it is installed to allow a constant air exchange inside the room.
The recovery system can be generally installed in residential or public places.
The product is supplied with a ceramic heat exchanger that accumulates heat during the
extraction of hot air coming from the room while, during the air intake from the outside, the device
transfers to the inlet cold air, the thermal energy stored in the heat exchanger.
The product is designed for wall installation. The duct containing the heat exchanger is supplied
for walls with a maximum thickness of 500mm; the duct can be shortened to a minimum of
250mm. It should be shortened flush internal and external wall.
The extracted or incoming air must not contain inflammable or explosive mixtures, chemical
vapors, dusts, oils and other pathogenic substances in general.
26