6. Make sure you have completely assembled the product
before running.
7. Periodically, at least once a year or more frequently in case
of heavy use, remove dirt and incrustation from the impeller
and motor casing and, if necessary, clean or replace the filter.
It is also very important to make sure the impeller is not
deformed or cracked, is able to rotate freely and without
oscillation, and is properly fixed to the shaft.
8. When the appliance is out of use, remove the power lead.
Moreover, make potentially dangerous parts harmless,
especially with regard to children who might play with
appliance when it is not in use.
9. Installation must be carried out by qualified personnel
according to manufacturer's instructions. Incorrect installation
can cause damage to people, animals or properties for which
the manufacturer cannot be considered liable.
10. The fan is a fixed appliance and the main supply must be
done by flexible cable with plug or by a unipolar switch with a
minimum opening of the contacts of 3 mm.
11. When installing the fan in a room containing a combustion
heater ensure that there is sufficient air to supply both
appliances. This is to ensure the efficient operation of the
heater and to allow a proper operation of the fan. The fan
must discharge into a single fume pipe or directly outside.
12. This appliance can be used by children aged from 8 years
and above and persons with reduced physical sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision
25