1. Creation of your own home
2. Research of installed devices and association of them in your home network
3. System configuration
For details, please refer to the App configuration and usage manual, which can be consulted
directly from the App, in "Settings/Product Instruction Manual page".
WARNINGS: the reaction time of devices varies depending on the speed of the home
connection.
INSTALLATION CONFIGURATION RESET
In case of device configuration errors, a factory reset is possible which returns devices to their
initial settings.
To reset the device it is necessary to remove the cover of the electronic board and press the
physical button indicated in the following image for 15 seconds, releasing it only after the unit
has emitted two acoustic signals (beeps):
At this the unit must be turned off using the main switch and then, turned it on again.
INSTRUCTIONS FOR USE
Please refer to the App configuration and usage manual, which can be consulted directly from the
App, in "Settings/Product Instruction Manual page".
MAINTENANCE – WHEN IS NEEDED
Every 3000 hours of operation the light indicator on the MASTER fan unit will flash to remind
you to do the product maintenance. At the same time, the FILTER STATUS indicator on the APP
will turn red, which signals the need to do routine maintenance.
37