Publicité
Les langues disponibles
Les langues disponibles
7. Control via the App
7.3 Declaration of the App
1
2
1. Changes the selected satellite (up / down).
2. Opens or closes the antenna.
3. Opens the „Configuration" page.
4. Updates the satellite configurations (firmware update) if available.
5. Displays the satellite parameters.
6. Open the manual setting menu.
7. Synchronization with the control unit. If the control panel is connected or dis-
connected to the control unit, synchronization is required to detect hardware
changes. Synchronization is also necessary to obtain configuration changes made
via USB.
8. Displays the device information.
3
6
8
4
ENGLISH
5
7
15
Publicité
