Publicité
Les langues disponibles
Les langues disponibles
5. Startup and operation
5.1 Starting up the system
First make sure that all connections between antenna, control unit, control unit and
receiver are connected correctly.
1. Switch on the control unit at the mains switch.
2. Press the
button on the front of the control unit. The LED of the last selected
satellite will light up and the antenna will straighten up.
3. When the antenna is up, the system automatically searches for the selected satellite.
4. Once the selected satellite has been found, fine tuning and the best possible anten-
na position are determined.
5. As soon as the antenna has logged in to the satellite, the picture appears on the TV.
Note: Make sure that the receiver or TV is set to the selected satellite (e.g. Astra 1,
19.2° East).
5.2 Select another satellite
If you want to select another satellite, simply press the p or q key on the control pa-
nel. The LED on the control panel indicates the selected satellite. Once you have selec-
ted the desired satellite, the antenna automatically searches for the desired position.
5.3 Switching off the system
To turn off the system and retract the antenna, press the
control panel. When the antenna is fully retracted, the system shuts down.
12
ENGLISH
button on the front of the
Publicité
