dB Technologies IA 504D Manuel D'utilisation page 41

English
LIMITER
Limiter Input channels
You can pass the Processing Channels through a compressor/limiter, for which you can set the threshold, ratio,
make up gain, and the attack, release and hold times. The output channels also have a limiter with the ratio pre-
set to ∞:1; the limiter remains active on the output channels in 70/100V output configuration and when loading a
preset in the output section.
The Limiter is enabled with flat settings by default.
Limiter Processing channels
IA504D Cod. 420120399 REV. 1.0
41