dB Technologies IA 504D Manuel D'utilisation page 2

EMI CLASSIFICATION
According to the standards EN 55032 and 55035 this is a class B equipment, designed and suitable to operate in
residential environments.
FCC CLASS B STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B,
§15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment.
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
WARNING
Make sure that the device is securely installed in a stable position to avoid any injuries or damages to persons or
properties.
Before installing the device check all the components for damages, deformations, missing or damaged parts that
may compromise safety during installation.
Follow the instructions in this user manual to properly install the device. It's suggested to keep enough distance
from other devices to allow the right cooling.
The warnings in this manual must be observed in conjunction with the "USER – MANUAL - Section 2".
IA540D
Cod. 420120399 REV. 1.0