Publicité
Les langues disponibles
Les langues disponibles
OPTIONAL
EQUIPMENT
CONNECTIONS
Optional Equipment
Connections
Note:
The remote control must be programmed
with supplied
codes to operate the optional equipment.
VCR Connection
VCRs,
video
disc
players,
video
game
equipment,
and
DSS equipment
can also be connected
to the video inputs.
See the optional
equipment
manual for more information.
Note:
VIDEO 1 input is a dual-purpose
input. It is primarily
intended for connection with 480i devices such as a DVD
player using the Y PB PR component
video jacks and
Audio L & R jacks. However, it can also be connected to
conventional
composite
video sources such as a VCR,
using only the Y/Video jack and Audio L & R jacks. The
on-screen
label
will display
Component
or Video
1
depending on which source is connected.
E
TERMINALS
ON BACK
OF TELEVISION
AMP ..........
© @
_)_
INPUT
1
R-AUDIO-L
TO AUDIO
COMPONENT
VCR
Note:
Rear A/V jacks diagram may va_ depending on model
Please refer to the FEATURE CHART on page 3 for your
model's capabilities.
Procedure
•
Connect equipment
as shown to front or rear Audio/
Video input jacks.
•
Select the Video mode by pressing TVNIDEO
button.
•
Operate optional equipment
as instructed in equipment
manual.
Note:
Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the
same time. If both are connected, signal interference will result.
Use either the S-VIDEO or the Video signal only.
Front Control Panel
The front control
panel can be used to operate the television
when the remote control is not available.
ON/OFF
INDICATOR
FRONT
AV PANEL
FOR
CT-32SL15
//
I
X!.................
@
POWER
ON/OFF
INFRARED
SENSOR
/
Note:
The ON/OFF indicator
LED (red) will light up (red) when
the set is on.
A second VCR, Camcorder,
DVD player, a video disc player,
video
game
equipment
or
DSS
equipment
can
also
be
connected
to the video
inputs.
See the optional
equipment
manual for details
Procedure
•
Connect equipment to front Audio/Video input jacks.
•
Press TV/VIDEO button to select the desired input.
•
Operate optional equipment
as instructed in equipment
manual.
Cable
Box Connection
Follow this diagram when connecting your television to a
Cable Box.
CABLE BOX
!
g
Cable
TERMINALS
ON BACK
OF TELEVISION
INPUT
1
TOAUO,O
COMPONENT
N,UDI,N
AMP
I
VIDEO
INPUT
_
/
/
I_
PR--
PB--Y/VIDEO
o,4
i
I......
s-_go_
_--
R
I
_
R-AUDIO-L
VIDEO
I
CABLES
NOT INCLUDED
Procedure
•
Tune the television to channel 3 or 4 depending
on the
RF out setting of the cable box.
•
Using the cable box, tune to the premium cable channel
you want to view.
Digital TV - Set-Top
Box (DTV-STB)
or DVD
Player Connection
Use
this
diagram
to connect
the
Panasonic
DTV-STB
(Digital TV-Set-Top
Box) to the back of your TV.
Note:
Rear A/V jacks diagram may va_ depending on model
Please refer to the FEATURE CHART on page 3 for your
model's capabilities.
CABLES
NOT SUPPLIED
_
COMPONENT
VIDEO
INPUT
TERMINALS
ON BACK OF TV
TERMINALS
ON BACK
OF
DTV-STB
OR DVD PLAYER
INPUT
1
I
;- LI
TOAOD,O
COMPONEN
RAUDIO-L
DI ITALTVOUTPUTI
I
AMP°
sv0
Notes:
There
are
three
video jacks,
Y, PB, and
PR.
Separate
component
color
inputs
provide
luminance
and color separation.
Use the L (left)
and R (right) audio inputs.
Select DTV-STB to 480i output mode. TV set can
receive 480i signal only. Picture distortion will result
if any other type of format is selected (i.e. 480p,
720p or 1080i).
60
Publicité
