Publicité
Les langues disponibles
Les langues disponibles
13 | Ice Alert
The «
Ice Alert» symbol appears and flashes when the remote sensor's
temperature is between -1.0°C to 2.9°C (30.2°F to 37.3°F).
14 | Outdoor Temperature Alert
Press the «[
]» button to set the Outdoor temperature alert function ON
or OFF for the current channel. To set other channels, use the «CH» button to
switch channels.
« HI
» symbol indicates the upper limit alert function is ON, « LO
symbol indicates the lower limit alert function is ON, and the absence of
these symbols means the Outdoor temperature alert function is OFF.
To set the upper or lower limit value, press and hold the «[
2 seconds. The set item will flash, and use the «[ + ]» or «[ - ]» buttons to adjust
the value. Press the «[
]» button to confirm and move to the next item.
Use the «CH» button to set values for other channels.
When the outdoor temperature exceeds the limit set for the channel, the
temperature value and corresponding icon will flash, and a beep reminder will
sound as long as the temperature remains above the set limit.
15 | Comfort Indicator
Drying: Humidity is less than 40% at any temperature.
Comfort: Temperature is between 20-28°C (68-82.4°F) with humidity
between 40-70%.
Wet: Humidity is greater than 70% at any temperature.
No display: When the temperature is outside the range of 20-28°C
(68-82.4°F) or humidity is not within 40-70%, no comfort display is shown.
22
16 | Trend Displaying
The current temperature/humidity/barometric pressure and their trends are
shown on the LCD display.
Once connected to the remote sensor, the main unit can display outdoor
temperature/humidity and their trends.
17 | Background Lighting
With the adapter used for power supply, press the «[
»
the backlight brightness.
When powered only by batteries (without the adapter), touch the «SNOOZE/
LIGHT» button once to activate the backlight for 10 seconds.
]» button for
18 | Description of Low Voltage Prompt
When the outdoor transmitter has low power, a flashing low power symbol
« » will be displayed next to the corresponding channel number.
Ref. 3044 - Installation and user manual
]» button to adjust
EN
23
Publicité
