Publicité
Les langues disponibles
Les langues disponibles
At 1:00 AM, 2:00 AM, and 3:00 AM, the clock automatically synchronizes with
the DCF signal to correct any time deviations. If synchronization fails, the
system will retry at the next full hour, repeating up to 5 times automatically.
To stop searching for the radio signal during RC reception, press the «[
button to exit the RC receiving mode.
F.Y.I.:
• We recommend placing the product at least 2.5 meters (8.2 feet) away
from sources of interference, such as televisions, computer monitors, or
switching power adapters.
• Radio reception may be weaker in rooms with concrete walls (e.g., cellars)
and offices. For better reception, position the system close to a window.
• During RC reception, only the «Light/Snooze» and «[
functional; other buttons are disabled. To perform other functions, press
the «[
]» button to exit the RC receiving mode.
6 | Manual Time Setting
Press and hold the «[
]» button for 2 seconds, the «
will flash. Use the «[ + ]» and «[ - ]» buttons to set the radio control function
ON or OFF.
Press the «[
]» button to confirm the setting and move to the next item.
The sequence of setting items is as follows:
RCC ON/OFF -> DST ON/OFF -> Time zone -> 12/24HR -> Hour -> Minute ->
Date Format (D/M or M/D) -> Year -> Month -> Date -> Temperature Unit
(°C/°F) -> Language of the Week -> Pressure unit (hPa/mb or inHg) -> Current
standard air pressure -> Current weather.
When adjusting values, press and hold the «[ + ]» or «[ - ] button for quick ad-
justments.
Press the «[
]» button to confirm the last item and return to normal mode.
If selecting the 12-hour format, «PM» indicates post meridiem.
18
F.Y.I.:
If there is no valid operation within 20 seconds, the device will automa-
tically return to normal time mode from the set mode.
]»
7 | Setting Daily Alarms
Press the «[
indicates ALARM1 is ON, «[
absence of these symbols means the corresponding alarm is OFF.
Press the «[
it again to show Alarm2 time (5 seconds), then return to the current time
display.
]» buttons are
To set Alarm1 time, press and hold the «[
Hour starts flashing. Use the «[ + ]» or «[ - ]» buttons to adjust the required
Hour.
Press the «[
the following sequence: Hour of Alarm1 -> Minute of Alarm1 -> repeat period of
Alarm1 -> Snooze time of Alarm1.
For the repeat period, use the following codes: M-F (Monday to Friday),
ON/OFF » indicator
S-S (Saturday to Sunday), M-F S-S (Monday to Sunday).
The Snooze time can be set from 1 to 30 minutes or turned OFF by selecting
«OFF.»
The same method can be applied to set Alarm2 time.
F.Y.I.:
• If there is no valid operation within 20 seconds, the device will auto-
matically return to normal time mode from the alarm time set mode.
• When adjusting the value, press and hold the «[+ ]» or «[ - ]» button
for continuous and quick adjustments.
• The Alarm will sound for 2 minutes if not deactivated by pressing any
button
Ref. 3044 - Installation and user manual
]» button to set Alarm1 and Alarm2 ON or OFF; «[
]» symbol indicates ALARM2 is ON, while the
]» button once to display Alarm1 time (5 seconds), press
]» button for 2 seconds until the
]» button to confirm the setting and move to the next item in
EN
]» symbol
19
Publicité
