Serial Number Plate; Technical Data - Hillyard T30 SC PRO Manuel D'utilisation Et D'entretien

SERIAL NUMBER PLATE

The serial number plate is positioned underneath the electrical system control panel inside the machine. It indicates the general machine
characteristics, in particular the serial number. The serial number is a very important piece of information and should always be provided
together with any request for assistance or when purchasing spare parts. The serial number plate contains the following:
11
10
9
8
7
Design by FIMAP Verona (Italy)
Assembled in FIMAP Verona (Italy)
Via Invalidi del Lavoro, 1 S. Maria di Zevio - Verona - Italy
6

TECHNICAL DATA

Rated machine power
Working capacity up to
(1)
Working width
Squeegee width
(2)
Brush head brush diameter (number - diameter)
Dimensions of cylindrical brush [number - (diameter - length)]
Number of brush head brush rotations
Brush head motor electrical properties [number / (voltage - rated power)]
Debris hopper internal volume
Weight exerted on the brush head
Gradeability (weight )
(5)
Traction motor electrical properties [number / (voltage - rated power)]
Forward speed (with transfer program active)
Suction motor electrical properties [number / (voltage - rated power)]
Vacuum on vacuum head
Maximum solution tank capacity
Maximum recovery tank capacity
Maximum solution tank capacity
Machine dimensions (length - width
Battery compartment dimensions (length - width - useful height)
Electrical properties of recommended battery [number / (voltage / electric charge)]
Maximum individual battery weight (recommended)
Machine weight
(4)
Machine weight during transport
GVW
Sound pressure level (ISO 11201) - L
Uncertainty K
pa
Hand vibration level (ISO 5349)
Vibration measurement uncertainty
Remarks:
(1) The working capacity is calculated using a forward speed of 1.5 Km/h.
(2) The width of the squeegee refers to its maximum footprint.
(3) The width is to be understood as being without the squeegee mounted on the machine.
(4) Machine weight: refers to the overall machine weight without the batteries, and with both tanks empty.
(5) Machine weight during transport: refers to the overall machine weight with the batteries, but with both tanks empty.
TECHNICAL DATA
- height)
(3)
(5)
pa
1. The maximum weight of the batteries that power the machine
1
(expressed in kg).
2. The IP protection rating of the machine.
2
3. The gross weight of the machine (expressed in kg).
4. The machine ID code.
3
5. The machine serial number.
6. The machine ID name.
4
7. The nominal power consumed by the machine (expressed in
W).
5
8. The maximum grade that the appliance can handle during
work activities (expressed in %).
9. The year of machine manufacture.
10. The nominal voltage of the machine (expressed in V).
11. The commercial name of the machine, and the manufacturer's
address.
TRIDENT
Unit of
Measurement T30SC PRO
W 1710
sq. /h 20591
ft
in 30,1
in 34,8
in 2 / Ø15,75
in
rpm
V / W 2 / (24 / 500)
ft
3
lb
%
V / W 1 / (24 / 300)
mph
V / W 1 / (24 / 422)
mBar
l
l
l
in 60 - 31 - 43
in 20,6 - 15,6 - 12,6
V / AhC 4 / (6 / 180)
5
lb
lb
lb
lb
dB (A)
dB (A)
m/s 0,63
2
1,50%
9
TRIDENT
T28SS PRO
1610
17362
25,4
34,8
-
- 2 / (Ø7,09 / 24,25)
140 550
2 / (24 / 450)
- 0,3
97 104
9 9
1 / (24 / 300)
2,9 2,9
1 / (24 / 422)
123 123
19 19
22 22
0,8 0,8
58 - 29 - 43
20,6 - 15,6 - 12,6
4 / (6 / 180)
68 68
439 421
728 710
930 904
66 66
1,5 1,5
0,63
1,50%