Publicité
Les langues disponibles
Les langues disponibles
8820193 'Nano Carbon' Variable Shade Auto-Darkening Welding Helmet V1.1
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by
the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).
1.
Always wear impact safety goggles that provide front and
side protection for the eyes.
2.
Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3.
Wear protective clothing designed for the work environment
and tool.
4.
Control the tool, personal movement and the work
environment to avoid personal injury or damage to tool.
5.
Do not operate any tool when tired or under the influence of
drugs, alcohol or medications.
6.
Use the correct tool for the job. This welding helmet was
designed for a specific function. Do not modify or alter this
welding helmet or use it for an unintended purpose.
SPECIFIC SAFETY PRECAUTIONS
WARNING! The Auto-Darkening Welding Helmet does not
protect against severe impact hazards, explosions or corrosive
liquids. Machine guards or eye splash protection must be used
when these hazards are present.
WARNING! Using filter forms from any other manufacturer's
helmet can seriously impair the protection provided and may
result in serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2.
This auto-darkening welding helmet is not recommended
for overhead welding applications, laser welding or laser
cutting applications.
4
For technical questions call 1-800-665-8685
Publicité
