Dimensional Drawings
Note that the values shown are approximate values.
[EP-C251]
1-1/4
[31.1]
[EP-C131]
13/16
[20.9]
* When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M4 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in
serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm)
length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more
the weight of the monitor.
Channels that can be used in wireless LAN (US and Canada)
Standard
IEEE802.11n/g/b
1-11ch
IEEE802.11ac/n/a
36/38/40/42/44/46/48ch
52/54/56/58/60/62/64ch
100/102/104/106/108/110/112/116/118/132/134/136/138/140ch
149/151/153/155/157/159/161/165ch
Channels that can be used in wireless LAN (Europe)
Standard
IEEE802.11n/g/b
1-13ch
IEEE802.11ac/n/a
36/38/40/42/44/46/48ch
52/54/56/58/60/62/64ch
100/102/104/106/108/110/112/116/118/120/122/124/126/128/132/134/136/138/140ch
149/151/153/155/157/159/161/165ch
• Outdoor use of the 5 GHz band is restricted by the Radio Law.
10
E
23-7/16 [596.0]
12-1/16 [306.4]
Channel
Channel
*
Screw holes for mounting brackets
7-7/8 [200]
Screw holes for mounting brackets
*
3-15/16 [100]
2412-2462MHz
5180-5240MHz
5260-5320MHz
5500-5700MHz
5745-5825MHz
2412-2472MHz
5180-5240MHz
5260-5320MHz
5500-5700MHz
5745-5825MHz
Unit: inch [mm]
Unit: inch [mm]
Frequency band
(center frequency)
Frequency band
(center frequency)