KitchenAid KFRU368T Instructions D'installation Et Guide D'utilisation Et D'entretien page 13

3. Remove foam block and wrap from inside the grill.
I/ ..............
A. Foam block
B. Foam wrap
4. Replace the grill grates.
5. Place warming shelf on brackets as shown.
6.
7=
B
A
A. Warming sheff brackets
B. Warming sheff
Attach condiment shelf (on some models) to the inside of the
left cabinet door.
B
A. Attachment holes
B. Condiment sheff
Dispose of/recycle all packaging material.
Make Gas Connection
Explosion Hazard
Securely tighten all gas connections.
if connected to LP, have a qualified person make sure
gas pressure does not exceed 11" (28 cm) water
column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
If converting to Natural gas, see conversion kit requirements in
the "Gas Supply Requirements" section. Follow instructions
included with kit.
LP Gas:
IMPORTANT: A 20 Ib LP gas fuel tank must be purchased
separately.
IMPORTANT: The gas pressure regulator/hose assembly
supplied with the grill must be used. Replacement gas pressure
regulator/hose assembly specific to your model, is available from
your outdoor grill dealer.
To Install the 20 Ib LP Gas Fuel Tank:
1. Open the 20 Ib LP gas fuel tank drawer.
2. Place the 20 Ib LP gas fuel tank bottom collar into the
mounting hole in the tank tray
3. Tighten the locking screw against the bottom collar of the
20 Ib LP gas fuel tank to secure.
B C
A. Locking screw
B. Mounting hole
C. Bottom collar
13