Hansgrohe Metris C 15404 1 Série Instructions De Montage / Mode D'emploi / Garantie page 14

10
2.5 mm
1
4 mm
2
Ø
14
1

English
Install the handle.
Tighten the handle screw using a .5 mm Allen
wrench.
Reverse the cartridge
If the valve opens through hot, reverse the
cartridge.
Close the stops using a 4 mm Allen wrench, or
turn the water off at the main (1).
Unscrew the nut ().
Use the following procedure to
remove the cartridge.
Do not attempt to pry the
cartridge from the function
block by using a screwdriver,
or damage to the cartridge will
result.
Place the handle on the cartridge stem.
Turn the handle counter-clockwise approxi-
mately ¼ turn after hitting the stop.