Publicité
Les langues disponibles
Les langues disponibles
Pos: 8.5 /Bedi enungsanleitungen/Betreiben/Entlad enetz teil e/Module EN S L RLC/015 Betreib en mit Signalleitung K 6 @ 2\mod_ 1529394133788_2848.docx @ 30847 @ 2 @ 1
5.2 Operation with monitoring function
The signal line K6 is connected to the K6 signal socket of the
discharging power pack.
1. Use the power switch to turn on the discharging power pack.
2. The discharging power pack is running.
3. The indicator light is not illuminated during the operation.
4. If a fault occurs, the contact pins 2 and 3 of the K6 signal socket
Pos: 8.6 /Bedi enungsanleitungen/S eitenumbruch @ 0\mod_ 1343041632941_0.docx @ 2959 @ @ 1
• As a check, the indicator light is illuminated briefly.
• To verify this, the power switch is illuminated.
• The contact pins 1 and 2 of the K6 signal socket are closed.
• The HV is switched on.
are closed.
• The indicator light is blinking.
• Proceed as directed in chapter Troubleshooting. Refer page
36.
5
Operate
35
Publicité
