Publicité
Les langues disponibles
Les langues disponibles
5
Operate
Pos: 8.1 /Bedi enungsanleitungen/Betreiben/Entlad enetz teil e/Module Allgem ein/001 Überschrift Betreib en und Einleitung @ 0\mod_1349959385481_ 2848.docx @ 2896 @ 1 @ 1
5 Operate
Preconditions:
The discharging power pack and the ionizing unit are connected and
installed as specified in the operator instructions.
Pos: 8.2 /Bedi enungsanleitungen/Betreiben/Entlad enetz teil e/Module EN S L LC/003 Hinweis Th ermowächter @ 2\mod_1529396204570_ 2848.docx @ 30870 @ @ 1
Pos: 8.3 /Bedi enungsanleitungen/Betreiben/Entlad enetz teil e/Module EN S L RLC/010 Normal betreiben @ 2\mod_ 1529406963657_ 2848.docx @ 30892 @ 2 @ 1
5.1 Normal operation
Operation without monitoring of the discharging power pack. K6
signalling socket is not connected.
1. Switch on the discharging power pack using the mains switch.
2. The discharging power pack is in operating mode.
3. The signalling lamp does not light up during operation.
NOTE:
In the event of a fault, the signalling lamp flashes to indicate this
status. Carry out chapter troubleshooting. Refer page 36.
Pos: 8.4 /Bedi enungsanleitungen/S eitenumbruch @ 0\mod_ 1343041632941_0.docx @ 2959 @ @ 1
34
• The signalling lamp will light up briefly to confirm.
• The mains switch will illuminate to confirm.
• The HV is switched on.
Publicité
