Chauvin Arnoux P01196522E Notice De Fonctionnement page 15

6 - RESISTANCES
Never test a resistance on a live circuit.
I Connect to the circuit or the component to test.
If the "Voltest" light comes on, presence of a voltage U > 15 V
AC/DC. Unplug the leads immediately and cut off the voltage
before making the resistance measurement.
I To get the resistance in Ω, multiply the reading on the Ω scale
(green) by the coefficient of the selected range: x 1 or x 100.
Ω (1)
x1
5 Ω to
Measurement
extent
10 kΩ to 1 MΩ
Internal
140 Ω
resistance
End of scale
10 mA
current
(2)
10 %
Accuracy
Permitted
440 V
overload
7 - CONTINUITY SOUND TEST
I Connection and specifications: idem Resistances
I Place the selector switch on the
I Continuous audible beep emitted for a resistance R < 50 Ω
8 - GENERAL SPECIFICATIONS
8-1 Dimensions and weight
I 56 x 105 x 160 mm
8-2 Power supply
I One battery 9 V (type 6F22 or 6LF22 alkaline)
I Battery life:
- 10,000 measurements of 15 seconds with alkaline battery for
R > 50 Ω
- 4000 measurements of 5 seconds for R < 50 Ω (with beep)
x100
500 Ω
(1) Common to the continuity
14 kΩ
sound test
150 µA
(2) In % at mid-scale.
x 1 function
I 500 g
15