United States Stove Company Ashley AP5622-W Manuel D'instructions Et D'utilisation Du Propriétaire page 4

FOR CUSTOMER SERVICE CALL: 800-750-2723 EXT 5050
TOP CONTROL MOUNT INSTALLATION
1. Pull the factory installed 5 Pin Main Wiring
Harness, 7 Pin Com Cabel, and 4 Pin Wiring
Harness, (not shown) out of the top of the stove.
5 Pin Main Wiring Harness
7 Pin Com Cable
2. Unpack the top mount controls and ensure that
all wires are securely attached.
3. Connect the factory installed 5 Pin Main Wiring
Harness to the top right-hand corner of the
control panel. Connect the factory installed
7 Pin Com Cabel to the control panel directly
below the 5 Pin Main Wiring Harness. Connect
the 4 Pin Wiring Harness to the bottom left-
hand corner of the control panel.
5 Pin Main Wiring Harness
4 Pin Fuel Sensor
© 2024 United States Stove Company
7 Pin Com Cable
INSTALLATION
4. Secure the control panel to the top of the stove
with two sheet metal screws.
4