EN CFX2 28, CFX2 37, CFX2 45, CFX2 57
•
• Keep the ventilation openings on the
device housing or in installations free of
obstructions.
• Do not use any mechanical objects or
other media to speed up the defrosting
process, unless they have been recom-
mended by the manufacturer for this
purpose.
• Do not open or damage the refrigerant
circuit.
• Do not use electrical devices inside the
cooling device unless they are recom-
mended by the manufacturer for that
purpose.
WARNING! Health hazard
• This device can be used by children
aged from 8 years and above and per-
sons with reduced physical, sensory
or mental capabilities or lack of experi-
ence and knowledge if they have been
given supervision or instruction con-
cerning use of the device in a safe way
and understand the hazards involved.
• Children aged from 3 to 8 years are al-
lowed to load and unload refrigerating
devices.
• Children must be supervised to ensure
that they do not play with the device.
• Cleaning and user maintenance shall
not be made by children without super-
vision.
WARNING! Explosion hazard
Do not store any explosive substances such
as spray cans with a flammable propellant in
the cooling device.
CAUTION! Electrocution hazard
• Before starting the cooling device, en-
sure that the power supply cable and
the plug are dry.
• Disconnect the cooling device from
the power supply before each cleaning
and maintenance and after every use.
12
Do not use or store the cooling de-
vice in confined spaces with none
or minimal air flow.
CAUTION! Health hazard
• To avoid contamination of food, re-
spect the following instructions:
•
Check if the cooling capacity of
the device is suitable for storing
the food you wish to cool.
•
Food may only be stored in its
original packaging or in suitable
containers.
•
Opening the cooling device for
long periods can cause significant
increase of the temperature in the
compartments of the device.
•
Clean regularly surfaces that can
come in contact with food and ac-
cessible drainage systems.
• If the device is le empty for long peri-
ods:
•
Switch off the device.
•
Defrost the device.
•
Clean and dry the device.
•
Leave the lid open to prevent
mould developing within the de-
vice.
NOTICE! Damage hazard
• Check that the voltage specification on
the type plate corresponds to that of
the energy supply.
• Only connect the cooling device as fol-
lows:
•
With the DC connection cable to a
DC power supply in the vehicle
•
Or with the AC connection cable
to an AC power supply
• Never pull the plug out of the socket by
the cable.
• If the cooling device is connected to a
DC outlet: Disconnect the cooling de-
vice and other power consuming de-
vices from the battery before connect-
ing a quick charging device.
• If the cooling device is connected to
a DC outlet: Disconnect the cooling
device or switch it off when you turn
off the engine. Otherwise you may dis-
charge the battery.